 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC74LCX273F/FW/FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LCX273F,TC74LCX273FW,TC74LCX273FT Low-Voltage Octal D-Type Flip-Flop with Clear with 5-V Tolerant Inputs and Outputs The TC74LCX273F/FW/FT is a high-performance CMOS octal D-type flip-flop. Designed for use in 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low-power dissipation. The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5-V supply environment for both inputs and outputs. This 8 bit D-type flip-flop is controlled by a clock input (CK) and a clear input (CLR). When the CLR input is low, the eight outputs are at a low logic level. All inputs are equipped with protection circuits against static discharge. Note: xxxFW (JEDEC SOP) is not available in Japan. TC74LCX273F TC74LCX273FW Features * * * * * * * Low-voltage operation: VCC = 2.0 to 3.6 V High-speed operation: tpd = 8.5 ns (max) (VCC = 3.0 to 3.6 V) Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V) Latch-up performance: 500 mA Available in JEDEC SOP, JEITA SOP and TSSOP Power-down protection is provided on all inputs and outputs Pin and function compatible with the 74 series (74AC/VHC/HC/F/ALS/LS etc.) 273 type TC74LCX273FT Weight SOP20-P-300-1.27: 0.22 g (typ.) SOL20-P-300-1.27: 0.46 g (typ.) TSSOP20-P-0044-0.65: 0.08 g (typ.) 1 2002-01-11 TC74LCX273F/FW/FT Pin Assignment (top view) IEC Logic Symbol (1) (11) CLR 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 VCC Q8 D8 D7 Q7 Q6 D6 D5 Q5 CK CLR CK R C1 Q1 D1 D2 Q2 Q3 D3 D4 Q4 D0 D1 D2 D3 D4 D5 D6 D7 (3) (4) (7) (8) (13) (14) (17) (18) 1D (2) (5) (6) (9) (12) (15) (16) (19) Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 GND 10 Truth Table Inputs CLR Outputs CK X Q L L H Qn Function Clear 3/4 3/4 No change D X L H X L H H H X: Don't care System Diagram D1 3 DR D2 4 DR D3 7 DR D4 8 DR D5 13 DR D6 14 DR D7 17 DR D8 18 DR CLR 1 CK CK 11 Q CK Q CK Q CK Q CK Q CK Q CK Q CK Q 2 Q1 5 Q2 6 Q3 9 Q4 12 Q5 15 Q6 16 Q7 19 Q8 2 2002-01-11 TC74LCX273F/FW/FT Maximum Ratings Characteristics Power supply voltage DC input voltage Symbol VCC VIN Rating -0.5 to 7.0 -0.5 to 7.0 -0.5 to 7.0 (Note 1) Unit V V DC output voltage VOUT -0.5 to VCC + 0.5 V (Note 2) Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature IIK IOK IOUT PD ICC/IGND Tstg -50 50 50 mA (Note 3) mA mA mW mA C 180 100 -65 to 150 Note 1: VCC = 0 V Note 2: High or low state. IOUT absolute maximum rating must be observed. Note 3: VOUT < GND, VOUT > VCC Recommended Operating Conditions Characteristics Power supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 2.0 to 3.6 -1.5 to 3.6 (Note 4) Unit V V V 0 to 5.5 0 to 5.5 (Note 5) 0 to VCC (Note 6) 24 12 -40 to 85 Output current Operating temperature Input rise and fall time IOH/IOL Topr dt/dv (Note 7) (Note 8) mA C 0 to 10 (Note 9) ns/V Note 4: Data retention only Note 5: VCC = 0 V Note 6: High or low state Note 7: VCC = 3.0 to 3.6 V Note 8: VCC = 2.7 to 3.0 V Note 9: VIN = 0.8 to 2.0 V, VCC = 3.0 V 3 2002-01-11 TC74LCX273F/FW/FT Electrical Characteristics DC Characteristics (Ta = -40 to 85C) Characteristics H-level L-level Symbol VIH VIL IOH = -100 mA H-level VOH VIN = VIH or VIL IOH = -12 mA IOH = -18 mA Output voltage IOH = -24 mA IOL = 100 mA L-level VOL VIN = VIH or VIL IOL = 12 mA IOL = 16 mA IOL = 24 mA Input leakage current Power-off leakage current Quiescent supply current Increase in Icc per input IIN IOFF ICC DICC Test Condition VCC (V) 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 0 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 Min 2.0 3/4 Max 3/4 Unit Input voltage V 0.8 3/4 3/4 3/4 3/4 VCC - 0.2 2.2 2.4 2.2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 V 0.2 0.4 0.4 0.55 5.0 mA mA VIN = 0 to 5.5 V VIN/VOUT = 5.5 V VIN = VCC or GND VIN = 3.6 to 5.5 V VIN = VCC - 0.6 V 10.0 10.0 10.0 mA 500 AC Characteristics (Ta = -40 to 85C) Characteristics Symbol Test Condition VCC (V) Maximum clock frequency fMAX tPLH tPHL Propagation delay time ( CLR -Q) tPHL tw (H) tw (L) Minimum pulse width ( CLR ) tw (L) (Figure 3) (Figure 1, Figure 3) (Figure 1, Figure 2) 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 (Note 10) 2.7 3.3 0.3 3/4 3/4 3/4 Min Max Unit MHz 150 3/4 Propagation delay time (CK-Q) (Figure 1, Figure 2) 9.5 8.5 9.5 8.5 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 ns 1.5 3/4 ns 1.5 3.3 3.3 3.3 3.3 2.5 2.5 1.5 1.5 2.5 2.0 3/4 3/4 Minimum pulse width (CK) (Figure 1, Figure 2) ns ns Minimum setup time ts (Figure 1, Figure 2) ns Minimum hold time th (Figure 1, Figure 2) ns Minimum removal time trem tosLH tosHL (Figure 4) ns Output to output skew ns 1.0 Note 10: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 4 2002-01-11 TC74LCX273F/FW/FT Dynamic Switching Characteristics (Ta = 25C, input: tr = tf = 2.5 ns, CL = 50 pF, RL = 500 W) Characteristics Quiet output maximum dynamic VOL Quiet output minimum dynamic VOL Symbol VOLP Test Condition VCC (V) VIH = 3.3 V, VIL = 0 V 3.3 3.3 0.8 0.8 V V Typ. Unit iVOLVi VIH = 3.3 V, VIL = 0 V Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Output capacitance Power dissipation capacitance Symbol CIN COUT CPD fIN = 10 MHz (Note 11) Test Condition VCC (V) 3/4 Typ. 3.3 0 3.3 7 8 25 Unit pF pF pF Note 11: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/8 (per bit) 5 2002-01-11 TC74LCX273F/FW/FT AC Test Circuit Output CL RL Measure CL = 50 pF RL = 500 W Figure 1 AC Waveform tr 2.5 ns Input (CK) tf 2.5 ns 2.7 V 90% 1.5 V 10% tr 2.5 ns tf 2.5 ns tw (H) tw (L) GND Input (D) 90% 10% 1.5 V ts (H) th (H) ts (L) th (L) 2.7 V GND VOH Output (Q) 1.5 V tpHL tpLH VOL Figure 2 tpLH, tpHL, tw, ts, th Input ( CLR ) tw (L) VIH GND Input ( CLR ) tr 2.5 ns 90% 1.5 V 10% tr 2.5 ns VIH GND Output (Q) tpHL VOH 1.5 V VOL Output (CK) 90% 10% trem 1.5 V VIH GND Figure 3 tpHL Figure 4 trem 6 2002-01-11 TC74LCX273F/FW/FT Package Dimensions Weight: 0.22 g (typ.) 7 2002-01-11 TC74LCX273F/FW/FT Package Dimensions Note: This package is not available in japan. Weight: 0.46 g (typ.) 8 2002-01-11 TC74LCX273F/FW/FT Package Dimensions Weight: 0.08 g (typ.) 9 2002-01-11 TC74LCX273F/FW/FT RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 10 2002-01-11 |
Price & Availability of TC74LCX273FT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |